The 300 mm reciprocating saw blade is made of HCS (High Carbon Steel), making it suitable for cutting soft and untreated wood. The material provides a good balance between flexibility and strength, allowing the blade to withstand the load during fast cuts.

The blade is designed for thick wood without nails up to 250 mm thick, as well as for pruning green wood with a diameter of less than 250 mm. It is therefore suitable for both construction and gardening work where fast and efficient cutting is required.

The design makes it compatible with most reciprocating saws and it can be used for both professional and domestic purposes, where a simple and reliable wood-cutting blade is desired.

The Festool RSC 18 5.0 EB-Plus is a cordless reciprocating saw developed for demanding cutting tasks in wood, metal and construction materials. It is equipped with a brushless EC-TEC motor that offers high efficiency and long service life, while the low vibration level ensures stable and controlled handling during work.

The saw features a pendulum stroke that can be activated as needed, increasing cutting speed on thicker jobs. The variable speed trigger provides precise control of the stroke rate, and the integrated LED lighting improves visibility in the work area.

The RSC 18 is built to withstand tough working conditions and comes in a practical Systainer³, which makes transport and storage easier. The saw blade can be rotated 180 degrees, allowing cutting close to walls, ceilings and floors.

The scope of delivery includes two 18 V 5.0 Ah batteries, a rapid charger, a dust extraction device, a universal wood blade and a Systainer³ storage box.

The Milwaukee Reciprocating Saw Blade Set + TCT 13P consists of 13 Sawzall blades, developed for efficient cutting in different materials. The blades have a tapered body that allows narrow radius and edge cuts, providing better control in precision work.

The optimised tooth geometry with 30 TPI is suitable for cutting thin materials between 0.6 and 1.5 mm. The set includes WRECKER, AX and TORCH blades, covering everything from wood with nails to metal and carbide.

The blades are made of robust material that ensures a long service life and efficient performance, whether in demolition, installation or precision work. The combination of 150 mm and 230 mm lengths provides flexibility for different types of cuts.

The Dewalt 18V XR compact reciprocating saw 1x battery is a cordless saw designed to deliver high performance in a compact format. The brushless motor contributes to a longer service life and more efficient use of energy, allowing longer working time on a single charge.

The compact gearbox construction reduces vibrations and increases comfort during use. According to the manufacturer’s information, the vibration level is approximately 5.5 m/s² when working on wooden beams and 8.1 m/s² on wooden boards, making it suitable for prolonged tasks.

An integrated LED light improves visibility in dark or narrow work areas, allowing the user to work with greater precision. The saw’s construction combines metal parts with a robust plastic handle, providing a good balance between strength and manageability.

This model comes with one battery and is part of Dewalt’s XR series, known for its efficiency and compatibility between tools using the same battery system.

The CMT 150mm HM Spec Reciprocating Saw Blade is a robust saw blade designed for use with reciprocating saws. It is made with carbide (HM) teeth, providing long service life and efficient cutting capability in demanding materials.

The blade is suitable for cutting porous concrete, brick, Eternit, fibre cement, plasterboard, fibreglass, epoxy (up to 100 mm), wood and nails, as well as MDF. It combines precision with robustness, making it suitable for both construction and renovation work.

With a length of 150 mm, it offers good control and stability during work, while being able to handle materials of varying hardness. It is a practical choice for craftsmen who need a durable blade for many types of tasks.

The Metabo SSEP 1400 MVT is a powerful pendulum reciprocating saw developed for demanding tasks that require high performance and precision. It is equipped with a 1400-watt motor that delivers constant power even under heavy load.

The saw has a 3-stage pendulum function that can be adjusted to the material for optimal cutting. This function allows you to choose between fast feed or more controlled cutting depending on the task.

The Metabo VibraTech (MVT) system reduces vibrations through integrated balancing, providing greater comfort and less fatigue during prolonged use.

The scope of delivery includes saw blades for wood and metal, as well as a practical plastic case for transport and storage.

The 150mm BIM Heavy reciprocating saw blade is a robust blade designed for use with reciprocating saws. It is made of bimetal (BIM), which provides a combination of flexibility and wear resistance, allowing it to withstand loads when cutting hard materials.

The blade is intended for cutting wood with nails or metal, chipboard up to 100 mm, fibreglass, plastic and epoxy up to 50 mm, as well as plasterboard. It is especially suitable for curved cuts, where precision and control are important.

With a length of 150 mm, it offers a good balance between reach and stability, making it useful for both precision work and more demanding tasks. It is part of CMT’s range of professional blades for craftsmen and DIY enthusiasts.

The Milwaukee TCT WRE 300/6T 5P reciprocating saw blade is part of the WRECKER™ series and is designed to tackle demanding demolition work in various materials. The carbide-reinforced teeth allow the blade to cut through thick metal, cast iron, wood with nails, as well as hardened screws and bolts.

The blade has a service life up to 50 times longer than standard Bi-Metal blades, making it suitable for intensive use. At the same time, the design provides up to 25% more cuts per charge when used with cordless saws.

The so-called FANG TIP™ makes it easier to start the cut, even in confined spaces, and allows plunge cuts. With a thickness of 1.27 mm, precise and straight cuts are achieved, while the blade height of 25 mm contributes to stability and reduces vibrations during work.

The blade is supplied in a pack of five units and is intended for professional and experienced users who need a durable and efficient tool for versatile demolition tasks.

The 200mm BIM Prog reciprocating saw blade is designed for use with reciprocating saws. It is made of bimetal (BIM), which provides a combination of flexibility and wear resistance, allowing the blade to withstand the load when cutting hard materials.

The blade is intended for cutting wood with nails or metal, particle boards up to 150 mm, metal sheets and aluminium profiles with thicknesses between 3 and 18 mm, as well as fibreglass and plastic/epoxy up to 150 mm. This versatility makes it suitable for both construction and renovation work, where materials vary.

With a length of 200 mm, the blade offers a good balance between precision and cutting depth, making it practical for both coarse and fine cuts. It can be used in standard reciprocating saws with a compatible mount.

The Milwaukee TCT WRE 150/6T is a multi-material reciprocating saw blade designed to handle metal, cast iron, wood with nails, as well as hardened screws and bolts. The blades are equipped with carbide teeth, providing a significantly longer service life than traditional bi-metal blades.

The optimised construction makes them particularly suitable for use with cordless saws, where efficiency and energy consumption are crucial. According to the manufacturer, they can offer up to 25% more cuts per charge compared to standard bi-metal models.

The blades have a thickness of 1.27 mm, which contributes to precise and straight cuts, while a blade height of 25 mm provides greater stability and reduces vibrations during work. The FANG TIP™ feature makes it easier to start the cut, even in confined spaces, and allows plunge cuts.

The set consists of five blades with a length of 150 mm and a 6T tooth geometry, making them suitable for demolition tasks in various materials where robustness and versatility are required.

The 225 mm reciprocating saw blade is made of BIM (bimetal), providing a combination of flexibility and wear resistance. It is designed to handle medium to thick metal sheets in the range of 2–10 mm, as well as thin- and thick-walled pipes and profiles up to 175 mm in diameter.

The blade is suitable for demolition work in metal where precise and controlled cuts are required. It offers light and fine cuts, making it suitable for both rougher tasks and more detailed cutting.

With its robust construction and efficient tooth geometry, it is a practical choice for professional users working in metal machining, assembly or disassembly.